As an Amazon Associate I earn from qualifying purchases.

Can Car Door Handles Be Wrapped?


If you are a automotive lover, you must be familiar with car handle wrapping.  But can car door handles be wrapped better or more efficiently? In short: 

Yes! You can wrap your car door handle. Vinyl is the most often used material for door handle wrapping. The vehicle’s original paintwork may be protected from UV damage and minor scratches and chips with vinyl car wrapping. 

Removing the hood handle off the car is the quickest and easiest way to vinyl wrap it. Removing the door handle before vinyl-wrapping makes the operation more efficient.

We’ll show you how to wrap door handles with vinyl and why we think it’s better than repainting.

Can Car Door Handles Be Wrapped: Is It Worth?

Door handles are notoriously tricky to wrap, but they’re necessary if you want your vehicle’s outside to match the rest of the world.


It’s not uncommon to find door handles that match the color of the car’s paint now that they’re no longer made of cheap black plastic.

It’s also possible to wrap them in a different material or color than the doors to add a dash of flair to the vehicle. 

Polycarbonate is a very effective plastic alternative. Several companies have used it. However, vinyl wrapping is the most effective method available today.

Do you dislike the look of chrome door handles? Are you interested in changing the color of your handlebars?

It’s faster, cleaner, cheaper, and better for the environment to have your automobile wrapped in vinyl than to paint it. No paint drips, brush or roller markings, no cleanup, and you won’t get dirty are all features of this product.

Vinyl is a flawless choice for your new car since it’s easy to clean and maintain. Vinyl is a long-lasting material that gives your car a unique style while preserving the paint. 

Are you a Tesla owner? Then Amazon has a wide variety of vinyl wrapping products for Tesla cars, including:

What You Need Before Vinyl Wrapping Your Car Door Handles?

You need the following kits before vinyl wrapping your car door handles:

  1. Vinyl.
  2. Steinel or Porter & Cable heat guns.
  3. Infrared Thermometer.
  4. Isopropyl Alcohol with Microfiber Towels 70 %
  5. Glove Wrap.
  6. Squeegee.
  7. Flex stream squeegee.
  8. Retractable blade knife.
  9. Star key.
  10. Screwdriver.
  11. Plastic trim removal tools.

Vinyl Wrapping Preparation

If you can’t find a YouTube video on how to remove your door panels, you can produce one yourself! All the best.

Using plastic trim removal tools, remove the inner door panels. Using a little trim piece placed back between the door and the plastic panel, I firmly utilize the leverage from the trim piece to snap out a connection in my vehicle.

With your hands, carefully but firmly remove the door panel from the door once the connections have been removed.

Take care while unplugging all the wires and sensors, and take a snapshot of the area before re-connecting everything.

Organize Your Time & Work

Do a comprehensive cleaning first! The quality of your preparation has a direct impact on the ultimate result.

It’s good to use an air compressor if you have one handy. A TAC cloth should be the last thing to contact your vehicle before putting the vinyl.

If you’re using a color shift vinyl, pay attention to the wording on the backing paper as you measure and cut your vinyl.

To avoid ugly seams, leave enough vinyl to cover the area you’re trying to wrap, but remember that you can always trim away the excess.

Applying Vinyl to Door Handle (Do It Horizontally)

Using the hard edge of the squeegee, carefully tuck the material under the front of the handle, and you’ll be able to TAC the corners of the material down.

The material should be cold-stretched with both hands once taken from the vehicle. Then move them away from each other and toward the back of the automobile.

Pull the vinyl in triangles to remove any creases or “finger”-like material that may have formed throughout the procedure.

Look to slightly lift each corner of the door handle once the material has been applied with your wrap glove or squeegee.

Apply heat to those corners. And each corner should fall into place, covering each corner as necessary.

Removing Door Handles and Finishing Touches

Tuck the extra vinyl around the corners once you’ve applied the vinyl evenly. 

Your particular vehicle’s processes may be different from those outlined here. So I suggest you look them up on YouTube or elsewhere to know what to expect.

Heat treatment for around two or three seconds is required first.

Carefully stretch the vinyl around the corners and pull it in the center to cover up the seams on the backside of the door handle’s handle. (It is essential to take your time at this step because it will make or break your work.)


Cutting a relief line directly along the vinyl center will help you properly distribute pressure as you pull it. When cutting, always finish in a circular motion to avoid leaving a straight edge.

Then, following the line, use the Flex Stream Squeegee to tuck the material into the seam.

Carefully cut along the seams to remove any extra vinyl after finishing! (Make sure to angle the blade’s tip towards the excess end of the vinyl.)

Use your Flex Stream Squeegee to smooth out the excess, and that’s all.

Bottom Line

When installed around tough corners, complicated forms, and curves, vinyl is stretched. Because most high-quality vinyl has heat memory, failing to provide heat can cause curling and lifting.

Post heating is a method of resetting your vinyl’s memory. The material permanently adapts to the object’s shape by heating the treated region for a long time.

Post-heating is a critical stage in the wrapping process that cannot be omitted.


How long do car wraps last on a car?

A well-applied vinyl vehicle wrap may endure for five to seven years, depending on how well it is applied.

It’s not out of the question that a lousy wrap job may fall short of such standards.

Are car wraps harmful to the vehicle?

Vinyl wraps are entirely safe to use on your automobile as long as there is a healthy coat of paint and solid metal below. Paint that has already started peeling away can be removed with it.

Are car door handle wraps worth it?

Yes, why not? This wrapping can save you valuable money.

The vinyl cover protects against stone chipping and other road damage. Protecting the paint can retain its resale value and save you money on minor scratch repairs.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top