As an Amazon Associate I earn from qualifying purchases.

How to Start a Car After Running Out of Oil? A to Z Guide


Remember that if your automobile runs out of oil, it’s not only a matter of refueling and starting it up. Pushing a vehicle that doesn’t have one would result in a breakdown. In this regard, you can ask:

How to start a car after running out of oil? Here’s a quick answer:

The engine of a car that has run out of oil is vulnerable to various problems. We’ve included a ten-step procedure below if your automobile just ran out of oil and you’d like to get it back on the road. Your automobile will be in good shape, and you will prevent engine problems as a result.

Every driver should be aware of having an oil leak in their vehicle. If your car has run out of oil, take the following precautions before starting it up:

So without further ado, here we go!

Why Changing Car Oil Is Important?

When it comes to keeping your car running smoothly, an oil change is a must. As a result, knowing how to start a vehicle after it has run out of oil is critical as it can rescue your car from extensive engine damage.


Your engine, like your body, relies on oil to run correctly.

Excessive engine wear and seizure can be caused by a lack of engine oil and dirty oil that hasn’t been changed in years.

The engine will seize if you run out of fat in your vehicle. When the oil in your car runs out, you risk causing serious harm to the engine.

There are many moving parts in an engine, and they rub against

By keeping them from rubbing against one another, the oil in the engine extends the life of the other components.

Keep your vehicle well-lubricated and check the oil level frequently. Thus you will get the most satisfactory performance from your car.

Knowing how to start a car after running out of oil comes in handy if you ever find yourself without oil in your vehicle.

What Happens When a Car Runs Out Of Oil?

Checking your car’s oil regularly and ensuring that your engine has enough oil is exceptionally vital for drivers.

Driving without oil can cause significant damage and even the breakdown of critical components, even if no symptoms are first apparent.

A lack of lubrication frequently causes parts to cling together, resulting in an automobile that won’t start. What are the warning signals that it’s time to replace the oil in your car?

The following are signs of a low oil level:

  • Overheating of the engine.
  • Your vehicle’s RPMs will be too high when you’re idling or at a stop sign.
  • Grinding noises will arrive from the engine region of your car.

Regularly checking the oil level in your automobile is essential if you want to keep your engine well-lubricated. That’s more difficult for older cars, which typically feature dipsticks that require the vehicle to be turned off to check the oil.

Modern automobiles are equipped with electrical devices that alert the driver when the oil level in the engine is dangerously low, saving the engine from serious harm.

How to Start a Car After Running Out of Oil?


Keep a calm head:

Your engine will overheat if you don’t cool it down! Start by putting your car in park.

After hearing a pounding sound from the engine and seeing your “check oil light” go up, it’s time to put the car in park and have it checked.

Despite these warning indicators, you risk having it seize up if you keep running the engine.

Because seized engines may be pretty expensive to fix, it’s better to stop the engine immediately if you observe any warning indications of trouble.

If you notice any of these signs, stop your car safely on the side of the road and switch off the engine.

Check to see whether the automobile has run out of oil by checking the dipstick:

If you’ve proven it ran out of oil, there may be a more significant problem lurking inside your vehicle.

Checking the oil level in your automobile is easy if you’re unsure if you’ve run out. A low oil level is evident if this happens.

Dispose of used motor oil and clean the drain line:

To begin, locate and remove the oil drain cap. Make sure you have a container available to catch the oil when it spills out of the machine.

Use a brush or vacuum cleaner to remove any metal particles from the channel after the oil has been drained. The channel can be refilled with new oil if no particles are visible.

Engine oil should be added to each cylinder after removing the spark plugs.

Crank the engine:

Crankshaft rotation is now required. If you have a 1/2-inch drive breaker rod, you can perform this using a breaker bar and socket.

It’s possible to use a cheater tube to get it going if it’s jammed.

Crank it up till it freely moves. Remember to keep an eye on each cylinder’s oil level as you go along!

Reinstalling the spark plugs will allow you to restart the engine. Remove the spark plugs and do a couple of manual engines turns after the crankshaft is loose.

As a result, the fresh oil will be better dispersed throughout the engine.

Start the engine by hand:

The next logical step is to fire up the engine and see what happens. Using this method, the oil will be spread throughout the engine.

Ten seconds of revving the machine will do the trick. Keep the spark plugs out and the gas pump turned off before starting the car. The components will be lighter as a result of this.

Return the fuze and the spark plugs:

If necessary, reinstall the fuse and the spark plugs in the proper locations. The gasoline tank must be replaced, and the spark plugs must be adjusted.

Be sure to give the gasoline a chance to circulate before starting the engine.

Turning on the car’s ignition for a few seconds is needed to perform this. Don’t start the engine; turn it on for seconds to get the gasoline moving.

By doing this, you can be assured that the engine’s moving components will be adequately oiled when you switch it on next time.

Start the engine and pay attention to what you hear:

Listen carefully for any knocking or clanking noises when you start your car. Be on the lookout for any unique sounds and be prepared to act.

To ignore the problem may result in more significant harm and increased costs in the long term.

It’s time to get behind the wheel:

First, take a few moments to listen to your car’s noises when it idles for a few minutes. Wait around 10-20 minutes after the engine has been running idle for 20 seconds without hearing any clanking noises.

Let the gasoline and motor oil flow as usual before putting any additional stress on your vehicle’s engine.

Taking a test drive is an option if you’ve waited long enough and heard nothing. Take it for a spin for around 15 minutes to determine any issues with the vehicle’s handling or performance.

The best thing to do if you hear a squealing noise or notice any problems with the car’s performance is to take it to a repair. It’s usually preferable to avoid an automobile problem than deal with it down the road.

So, keep a close eye on your engine and take it for a spin now and then to ensure it’s in good working order.

Increase The Life Expectancy Of Your Vehicle’s Engine

Having a car is a huge responsibility. 3,000 to 5,000 miles is the recommended interval for an oil and filter change.


Keeping your car’s oil clean may help extend the engine’s life.

Even though there are many other important reasons to maintain your engine, oil levels might vary from a few changes to a complete engine replacement.

Inner harm might result from a lack of awareness of one’s oil. Engine failure due to a lack of oil is the most challenging problem.

If your car doesn’t start because the oil is running low, there are a few things you may try.

Do You Know What to Do When You Run Out of Oil?

Here are a few things you should know if you run out of oil on the road and need help. If this is happening to you, steps to follow may be found here.

The first thing to do is:

To begin, turn on the hazards and put the gearshift in Neutral. To avoid interfering with other drivers, drift the automobile to the side of the road. Make sure that you don’t overwork your engine by stepping on the accelerator too much.

The second step is as follows:

Set security triangles at a distance of 50 meters from your car once you’ve drifted your vehicle down the side of the road. Call a mechanic to examine your vehicle from there.

An insurance company towing service can usually be relied upon to transport your car for further inspection to a reputable oil change facility.

The third step is to begin:

Even while waiting for a service, you may look for any suspected leaks under your vehicle. It’s at least a good idea to tell the technician about what you’ve seen before they begin diagnosing your car.

What Happens If Your Car Runs Out of Oil While Driving?

The likelihood that your automobile will ultimately run out of oil while you’re behind the wheel is little to none.


You must switch on your hazard lights, move into neutral, and then drive your car to one side while waiting for help.

Damage to the engine is more likely if you continue to drive the car with no oil.

Your engine will not function properly if the oil level is too low. To avoid issues, these parts must be correctly lubricated. We hear grinding and rattling noises as well as these others.

Because of this, you are starting your automobile with little oil is a terrible idea. It can cause your rods to break in general. You may hear a banging sound coming from beneath your hood if you have one of these.

Running an engine with little oil can lead to various problems, which can be avoided in this manner.

Put your car in the parking and shut off the engine. This level extends the life of your engine. After that, get in touch with a towing company for immediate help.


Many responsibilities come with owning an automobile.

When the oil level drops dangerously low in a contemporary automobile, the engine light on the dashboard will alert you. A dipstick may be used to check the oil level manually if you’re driving an older vehicle.

The topic of getting a car to start again after it has run out of oil has been covered in detail in this tutorial. The precise step-by-step technique that we’ve outlined will help you through the entire process.

Keep in mind that maintaining the proper quantity of engine oil is critical to extending your engine’s lifespan.


How often should you change your oil?

How often you should replace your oil depends on your automobile, driving style, and location. You should change your car’s oil every 3 months.

If you live in a dusty environment or travel in a hurry, you may need to replace your oil more frequently.

Bring your car in for a quick examination if you’re unsure when you last changed your oil.


How can you fix an engine that’s running low on oil?

After filling the cylinders with oil, let them sit for a few days. If the engine doesn’t start, a breaker bar may be able to help. If the engine moves, it may be feasible to preserve it.

How do you get an engine unstuck?

You may liberate the engine by twisting the bolt in the other way. Apply penetrating oil to the cylinder walls through the spark plug wells if the engine won’t start. After allowing the oil a few hours to pass through the piston rings, repeat the procedure.

Can I use new oil with my old oil?

Adding fresh oil to old oil is absolutely allowed to maintain proper oil levels between oil changes. It is crucial to add the oil type advised by your manufacturer. Changes in the engine’s oil cannot be made by simply adding more oil.

How long does it take for oil to sink in an engine?

How long does it take for engine oil to lubricate the moving parts of a vehicle?

It is possible to correctly assess the oil level in your engine if the oil has reached the bottom of its oil pan. About 10 to 15 minutes later, the oil in a car will settle, and the engine will cool.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top