How Much Does It Cost to Wrap a Jeep Wrangler: Is it Worth it?

Jeep Wrangler is known for its robust, off-road capabilities and versatility. But how much does it cost to wrap a jeep wrangler?

A Jeep Wrangler vinyl wrap can cost anything from $1,200 to $4,500. On the other hand, suppose that you decide to go to an installation business specializing in such work. Expect to pay between $2,000 and $5,000 or perhaps more if this is the case.

A lot of time and effort will be needed, including wrapping the Jeep’s roof to its exhaust pipe. This task is nearly as demanding and time-consuming as a full-scale paint job. 

Nevertheless, based on the listed pricing, we may deduce that it is rather inexpensive.

However, if you’d want to learn more about the Jeep Wrangler’s vinyl wrap, please continue reading.

Difference Between Painting & Wrapping

So, which is better for a Jeep Wrangler: painting or wrapping? Both are great! You may paint it with a paint code that matches your Jeep Wrangler. 

You should expect a hefty charge for this service because it’s what experienced vehicle painters do every day.

Additionally, you’ll have to pay to have minor dings and scratches repaired and paint chips repaired before bringing your vehicle to be painted.

Wrapping. If you’re new to automobile restoration, you’ll save money and time by doing this instead of painting. Vinyl material may also be used to wrap your Jeep Wrangler. 

Vinyl wraps come in a variety of forms, and this might make it difficult to choose the right one for your Jeep.

For a vinyl wrap to appear its best, it must be the proper sort of vinyl and the right color match for your car. 

The jeep wrangler may appear cheap and peel off after a year or two if you hire an untrained specialist to apply a vinyl wrap.

How Much Is It To Wrap Jeep Wrangler?

You may use vinyl to cover your Jeep, whether a Wrangler or another model. In addition, it’s easier to disassemble a Jeep than many other automobile kinds, which might result in savings when putting a wrap.

Jeep Wrangler owners may want to consider wrapping their vehicles. Consider the price of wrapping a Jeep Wrangler as one of the most important factors.

For a vinyl finish, wrapping a Jeep Wrangler ranges from $1350 to under $5000.

When it comes to the expense, it all depends on whether or not you hire a professional or do it yourself.

Paint Vs. Wrapped: Which One Is Cheaper?

Wrapping your Jeep Wrangler with vinyl will save you money and look just as good as painting your vehicle. Wrapping a Jeep Wrangler typically costs $1300, including all the required labor and equipment.

Since this service covers the labor and all of the necessary supplies, the typical cost for painting a Jeep Wrangler is $1350.

Getting any paintwork done by a qualified vehicle wrap business is the most important thing to remember.

Painting is more cost-effective in the long run than wrapping since it lasts longer and corrects the underlying problems with your wrangler, whereas wrapping can begin to show symptoms of age very quickly.

Types of Jeep Wrangler Wraps

Wraps for jeep wranglers come in a variety of styles. 

Wrapped in carbon fiber:

Carbon fiber is utilized to create this form of a wrap, which is often applied to the back of the vehicle. This is an excellent option if you want to give your Jeep Wrangler a real one-of-a-kind appearance.

Keep in mind that a large chunk might easily fall to the ground, which is not something that you want to happen.

Wrapped in a metallic sheen:

If you’re a fan of this wrap style, don’t hesitate to wear it. It’s commonly found on the back of Jeep Wranglers, giving the vehicle a more aggressive appearance.

A large-sized wrap can be difficult to construct, so shop around for a decent one that looks well and lasts a long time.

The vinyl wrap:

Despite its durability, it is susceptible to wear and tear over time. Still, this is the cheapest way to have a vinyl wrap for your cars inside.

With a wide range of options, you may even have your seats or dashboard decorated with an intricate design.

Gloss wrap:

This wrap is more expensive than the standard because of its high-gloss look. It’s almost as if you’re using a brand-new layer of vinyl rather than the standard one.

Wrapped in 3M:

Because it is so frequently used, the most common wrap is made by 3M. As a result, it can endure longer than normal vinyl wraps. It’s also simple to install and gives your Jeep Wrangler a new style.

Matte Wrap:

Matte wraps are the newest on the market, and they lack the dazzling sheen of their predecessors. A layer of vinyl is coated with a specific polymer resin to create these wraps.

As a consequence, a natural matte finish will be achieved.

Partial Wrap:

Only a portion of the vehicle is covered with vinyl in a partial wrap. When it comes to Jeep Wrangler Rubicon models, this is the most common way to go.

You can utilize either the front or the back of the vehicle. It’s possible to cover the sides of a jeep wrangler if you like.

Full Wrapping:

A full wrap is an option if you want your Jeep Wrangler completely covered in vinyl graphics. This is when you’ve covered nearly every inch of the Jeep.

Cost of Different Types of Wrap for Jeep Wrangler

What’s the point of getting your Jeep Wrangler wrapped? Why would you do that? The most apparent answer is to improve its overall appearance. Jeep owners wrap their cars for three main reasons, in our opinion.

The final factor has to do with your Jeep’s upkeep. It’s possible to shield the Jeep Wrangler’s finish from damage by wrapping it.

You may even wrap your Jeep to serve as mobile billboard advertising for a company or brand. How much money are you willing to invest in car wrapping?

Are Jeep Wranglers wrapped for an average price? Depending on the finish you choose, the price of wrapping a Jeep Wrangler will vary greatly. 

A vinyl finish should cost between $1500 and $5000. Even though these prices are just preliminary predictions based on current pricing trends, the lower the price, the better the deal, you’ll get.

In contrast, if you like a chrome finish, you may have to pay extra for it—chrome wrap costs between $6000 and $10000, which is more expensive.

The first time might be particularly challenging if you don’t already have the necessary knowledge and abilities. 

If you hire a professional to wrap your Jeep, the cost will be more. You’ll have to factor in additional costs if you’re doing it yourself.

Selecting the Proper Vinyl Wrap

It has been developed by companies like 3M to attach to your Jeep’s paint without causing damage. 

Many people, like me, enjoy the fact that a car cover may genuinely protect their paint from minor scratches and dirt.

Many people do not consider Jeep wrapping to be paint protection, but I’ve found it effective in preventing typical tree limb pin striping. 

The 3M Satin Blue is my pick for this case. However, it is only available in 100 sq/ft rolls, which costs roughly $205.99 per roll or $2.06 per square foot, but blue on grey is my thing.

I measured my Jeep JKU, a four-door vehicle, to determine how much vinyl I’ll need from the top to the tailpipe. 

Overall, the hood took up 30 square feet, which is all I’ll wrap for now. 

The top is 54 square feet, the sides are 74 square feet each, and the front and rear are 60 square feet each. The final tally equals around 300 square feet, or three rolls, depending on how you round up.

There’s a lot of disassembling and work involved in applying the vinyl, but the results will be worth it in the long run. 

Wrapping a Jeep Wrangler won’t conceal minor flaws like dings or scrapes. Before moving on, you might want to fix those dings and scrapes.

Needed Equipment for Wrapping

You’ll need these kits below to wrap your Jeep. Most of it is likely already in your possession:

• A Heat Gun.
• A Spray Bottle.
• Dawn Dish Soap.
• Water.
• Microfiber Detailing Towel.
• A vinyl-specific toolkit.

Aspects That Impact Wrap Costs

Jeep Wrangler’s Overall Length:

The average cost of wrapping a Jeep Wrangler is $1300, including all the materials, labor, and equipment you need to finish your job.

When labor expenses are taken into account, vinyl wrapping is less expensive than most other forms of painting. However, the price of your vinyl wrap will be affected by a few factors.

Getting an estimate from a skilled vehicle wrap provider before beginning your job is critical since the size will influence the amount of material required. As the size of your car increases, the expense of wrapping it will also increase.

Types of Vinyl Wrapping:

The most common form of vinyl wrap is called a “straight-line” wrap since it wraps around your jeep wrangler completely.

You may achieve a tighter wrap for a tighter appearance by choosing from various wrap thicknesses. If you want a tighter vinyl wrap, you’ll have to pay additional money.

Model and Color:

The color and year of your Jeep affect the price of vinyl materials. According to the year your Jeep Wrangler was made, the cost of covering your Jeep Wrangler will differ significantly.

The price will rise since it requires more material to cover a dark hue like black or crimson. To completely cover the Jeep Wrangler, you may need to acquire a greater piece of vinyl.

Vinyl Wraps Design:

According to what you want to be printed on it and how large a picture is, you may choose how your Jeep Wrangler will be covered. Wraps come in various styles and can be framed or left as a plain vinyl background.

Wrap it with threads, cloth, patterns, or even metallic hues if you’d want. 

A few more services are required:

It is common for professional vehicle wrap firms to provide other services such as a painting job and other extra items like aftermarket stereos and window tinting.

The pricing for these extra services will vary depending on how much money the professional vehicle wrap company wants to make from that service.

The immediate neighborhood (Market):

Another factor to consider when looking at expenses is where you live. Getting your Jeep wrapped will be less expensive if you reside in a small town with less competition and fewer options for services and goods.

There are certain exceptions, though, such as making a large buy (such as a new automobile) or looking for a specific product that isn’t accessible locally (such as an aftermarket radio for your jeep wrangler).

How to Reduce Cost When Wrapping Your Jeep Wrangler?

When wrapping a jeep wrangler for the first time, you may want to consider the expense first. Jeep wrangler wraps often cost between $1300 and $2500.

Carbon fiber and metallic coverings, two popular choices, can help you go even further. 

Fortunately, there are methods to save money yet receive a good-looking vehicle wrap.

To help you save money, here are a few ideas:

Instead of painting your Jeep, try a vinyl wrap:

You should expect to pay anything from $1350 to $4,000 on average to get your Jeep painted. Vehicle size and what you want to be done might affect this price. 

A vinyl wrap isn’t a fantastic choice if you’re looking for anything long-term, but it may work if you’re looking for a short-term fix.

Save money by not utilizing the other services:

These extra goods and services are necessary to make the wrap look and endure as long as possible. However, you may still discover firms who do not provide this service and will handle it all themselves if you choose.

Get different designs and colors:

If you want to customize the appearance of your Jeep Wrangler, there are a plethora of firms that sell different designs. 

Shop around until you discover one that suits your preferences. The less money you have to spend on your vinyl wrap, the more design alternatives.

Wrap up a portion of it:

This is the cheapest and most convenient choice if you don’t want to cover your Jeep Wrangler entirely.

However, if you’re set on doing everything, you may go with a complete wrap, which would set you back more money than you anticipated.

The good news is that a complete wrap looks nicer and lasts longer than a partial one, so it’s not a horrible idea.

First, get the proper size:

A complete wrap that is either too large or too tiny will look ugly, so be sure to account for that when placing your purchase. Before placing your order, double-check the size to avoid sending back and forth between two different sizes.

Avoid getting the tight wrap:

Vinyl wraps may not cover all the areas of your jeep wrangler, or they may be excessively tight, resulting in a poor fit. So you better bypass it to decrease cost.

FAQ’s

Will vehicle wraps damage paint?

A wrap will not harm the paint of a new or high-quality vehicle. When vinyl is properly removed, no paint residue or the clear coat is removed.

Does vinyl work on uncoated metal?

Yes, you may apply a car wrap on a vehicle with no paint. The lengthy answer: While vinyl wrap can be applied over a non-painted surface, this is not recommended.

In contrast to other exterior body treatments like paint protection film (PPF), PVC wraps may adhere to bare metal with ease.

Is it possible to apply paint on the dashboard of a vehicle?

You can, however, paint your vehicle’s dashboard at home if you’re ready to put in the time and effort. Custom painting the dashboard may be a rewarding endeavor, regardless of whether your goal is to enhance the interior aesthetics of your automobile or to fix minor scratches.

What is the DIY Cost for Installing Vinyl Wrapping?

Installing a vinyl wrap on a car like a Mustang isn’t too difficult, and the technique is very similar to that of other automobiles (about which we have previously reported).

Matte, gloss, carbon fiber, or even an individually designed multi-color wrap are all options for customizing your vehicle’s exterior color (which will be slightly more expensive).

It’s best to buy vinyl in five-foot by 25-foot rolls because they’re the most cost-effective solution.

Final Verdict

You may preserve your vehicle’s glossy coating and bodywork with vinyl.

As a result, many Jeep Wrangler owners opt to install a vinyl wrap to protect the Jeep’s body from scratches and other surface damage when off-roading, which is both effective and economical.