Spray paint is often durable and stays on for a long time. However, there are several places on your car that get frequent touching, for instance, car door handles. You might find that the spray paint from your car’s door handles wears out faster than the rest of the body. Most car owners look for quick and economical fixes to deal with this worn-out paint. Plasti dip is a good solution, but can you use plasti dip on car door handles?
Well, Yes! You can definitely use it as a durability solution on your car handles.
Read on to learn what Plasti Dip is, its benefits, and how you can use it.
What is plasti dip?
Plasti dip is a rubber-based coating that has been on the market since 1972. It is air-dry and easy to use. Its flexible, insulating, and peelable nature makes it useful for many purposes, such as making a firm gripping surface for tools. Since Plasti Dip is moisture, abrasion, acid, and corrosion-resistant, it acts as a durable and nonslip coat.
One of the unique features of plasti dip is that it can last up to three years with proper application. At the same time, it can easily be removed or redone without costing much time and money.
Can you use Plasti dip on car door handles?
You can use plasti dip on car door handles as it can come in handy as a quick and cheap fix. It can be a great solution to worn-out paint or when car owners want to customize their cars.
While Plasti Dip can be your savior, you must consider the fact that you will be needed to reapply it after every few months as it does not hold permanently.
If you are looking for a permanent fix, redoing the paint might be your only option. However, it will cost you a significant amount of money compared to Plasti Dip, with no guarantee that it will last permanently.
Why you should use Plasti Dip on car door handles
Following are some reasons due to which the car owners might want to use Plasti Dip on their car door handles:
1. To prevent or treat worn-out paint
As mentioned earlier, car door handles are part of the car that experiences a lot of friction. This makes the paint at these places wear out before time. Plasti dip is an economical solution that can remedy worn-out paint and help prevent the further fading of the paint.
2. For customization
Plasti dip comes in a variety of colors. This allows the car owners to customize their car door handles along with other places of the car themselves. This coating does not cost much, enabling a cheap way to customize your car.
Moreover, if you don’t like the end result, you can easily peel off the rubber covering and redo it according to your liking.
3. Easy to use
Plasti dip comes in spray cans that are easy to use. You just need to shake the can and spray it over the surface. Due to the simplicity of this method, car owners can apply it themselves rather than depending on some professional.
4. Quick fix
Even though plasti dip does not last as long as traditional car paint, it comes in handy when car owners need a quick fix. It is easy to apply and dries up quickly, saving a lot of time and effort.
There is no doubt that traditional car paint lasts longer than the plasti dip, but at the same time, it is extremely expensive. Plasti dip is a comparatively economical solution for worn-out car door handle paint.
How can you use plasti dip on car door handles?
Fortunately, plasti dip is a car owner’s backyard solution. Don’t worry about performing the process at home.
Here are three simple steps to apply plasti dip on car door handles:
Plasti dip should not be applied directly on the car surface without cleaning. This is a crucial step in applying plasti dip and may affect the end quality of the coating.
Your car carries dust particles and other debris which may not be visible to the naked eye. Spraying over this surface can cause small bumps and uneven surfaces of the door handle, which can be felt when the user touches the door handle. It can also prevent the coating from sticking directly onto the car surface, reducing its durability.
Hence, it is important to clean door handles first. Once the car is cleaned, move on to the next steps.
Applying masking tapes to the surrounding area
Removing car door handles from the car is not an easy task but is a must if you are painting your car. Fortunately, there is no need to remove car door handles if you apply Plasti dip.
However, you need an alternative to ensure that Plasti dip doesn’t accidentally get applied to the surrounding or unnecessary areas. For this purpose, a masking tape can come in handy.
So, before spraying, carefully apply the masking tape to the surrounding areas.
Spraying the plasti dip
Once the door handles have been well prepared for application, the last but most significant step comes. These steps include the final application of plasti dip on the car door handles.
Before spraying the plasti dip, make sure to shake the can properly. Remove the cap from the can. Hold it at least eight to nine inches away from the handle and spray on the handles evenly, ensuring no space is left behind.
An increased number of coats can help the plasti dip hold on, and at the same time, it will make it easier for you to peel it if you don’t like it or get bored of it.
A thin coating peels off little by little, whereas a thick coating peels off as one sheet.
Plasti dip can be used on car door handles along with several other parts of cars. Like every other solution for worn-out paint of car door handles, plasti dip comes with its own pros and cons. The choice to use plasti dip depends upon the car owner and his specific needs.
Hello Automotive Gear Lovers!
VehicleOnly is always on the lookout for the best brands and products. My experience has already helped several purchasers save money.
My goal is to help newbies locate the right automotive gears and parts for their vehicles. This is all about my short bio. For more information, go here!